• HOME
  • PRODUCTS
    • MONITOR (PASSIVE) – SUMMARY
      • Joey (2-way bookshelf)
      • Kanga (2.5-way centre)
      • Kama (2.5-way floorstanding)
      • Kurlette (sealed subwoofer)
    • REFERENCE (PASSIVE) – SUMMARY
      • Tripos (3-way standmount)
      • Kurre (2-way standmount)
      • Kantu (3-way floorstanding)
      • Kurlo (sealed subwoofer)
    • ULTIMATE (ACTIVE) – SUMMARY
      • Big Red Actives (3-way+DEQX)
      • Tikandi Be (3.5-way+DEQX)
      • Tikandi Grande Be (4.5-way+DEQX)
      • Isobaric Small Red Be (3.5-way standmount+DEQX)
  • REVIEWS
  • FEEDBACK
  • PRICES
  • ABOUT US
  • CONTACT
  • ULTIMATE(ACTIVE)
    HOME > PRODUCTS > ULTIMATE(ACTIVE)
    Legend Ultimate (active) monitors take speaker sound quality to another level. Being 'active' means the drivers are connected directly to their own power amplifier for greater dynamics and control. The Xover of signals between drivers is performed by DEQX processors where it can be done much more accurately. The processors also correct for any driver non-linearity as well performing room correction so that the sound you hear is closest to the recorded event - like being there!
    Caption Text8

BIG RED ACTIVES

The Big Red Actives live up to their namesakes – those kangaroos which are a fast agile animals inhabiting the flat open Australian landscape!  Each driver has been very carefully chosen to give very low distortion over their required frequency ranges and each is connected directly to built-in latest Hypex Ncore amplifiers.  After connecting the BRAs to a DEQX processor through supplied balanced interconnects all you need to do is add sources of your choice.

TIKANDI GRANDE Be

The Tikandi Grande Be builds on its smaller sibling, the Tikandi Be, by adding a a dedicated 7″ driver to reproduce in yet more detail the upper-bass/lower midrange.  It has also enabled us to use a smaller unit for the vital upper midrange. Notwithstanding its ground-breaking technology producing unprecedented accuracy and low distortion, the Tikandi Grande Be loudspeakers have been designed by people at Legend & DEQX obsessed with musical enjoyment – these speakers arouse the emotional response of ‘like being there’ at a live performance with their effortlessness & fidelity to your music.

SPECIFICATIONS

Configuration bass + mid + treble Active requirements DEQX processor
Frequency response 35- 25,000Hz ± 3 dB; 100-10kHz ± 1dB phase linear Size(mm) 1000(h)x300(w)x300(d) at base
Built-in bass amp 500W Weight 45 kg each
Built-in mid & treble amp 125W each Warranty 7 years

SPECIFICATIONS

Configuration 2xsubs + bass + mid + treble Active requirements 2xDEQX processors
Frequency response 20- 35,000Hz ± 3 dB; 80- 12,000Hz ± 1dB phase linear Size(mm) 1150(h)x400(w)x400(d) at base
bass amp required 300-100W Weight 55 kg each
other amps required 50-200W each driver Warranty 7 years

TIKANDI Be

The Tikandis also live up to their name – an indigenous Australian word meaning ‘live’.  To achieve this level of “liveness” and “like being there” involved the cooperation of two of Australia’s most innovative audio companies, DEQX and Legend Acoustics. Both have a passion for live music and a deep understanding that comes from long experience and comprehensive knowledge.  Thus the Tikandi is designed to produce unparalleled fidelity to music as it was recorded.

Active Isobaric Small Reds

The DEQX-active Isobaric Small Reds are our ultimate stand-mount loudspeaker. Their pyramidal cabinets are ‘form following function’ to minimize internal standing waves and to reduce diffraction from the front baffle. They are populate with 4 of the best drivers available – a beryllium tweeter for extended highs, ceramic-coated midrange for ultra-clear mids and 2 bass drivers in isobaric configuration for fast, deep bass. Combined with a DEQX preamp/processor and high quality amps they sound ‘like being there’!

SPECIFICATIONS

Configuration 2 x bass-mid + mid + treble Active requirements 1xDEQX processor
Frequency response 30- 35,000Hz ± 3 dB; 100-10kHz ± 1dB phase linear Size(mm) 950(h)x300(w)x300(d) at base
bass amp required 300-1000W Weight 45 kg each
mid & treble amp required 50-200W Warranty 7 years

SPECIFICATIONS

Configuration isobaric bass + mid + treble Active requirements 1 DEQX preamp/processor
Frequency response 50 – 35,000Hz ± 3 dB; 80 – 20,000Hz ± 1 dB Size(mm) 500(h)x230(w)<br>x350(d) at base
bass amp required 100-300W per channel Weight 17 Kg
mid & treble amps 50-100W per channel Warranty 7 years
Visit our Facebook page for the latest news and developments
LEGEND DEALERS

Carlton Audio Visual
164 Lygon St
Carlton MELBOURNE VIC
Ph: (03) 9639 2737

Acoustic Adventures
Wahroonga SYDNEY NSW
Ph/text: 0421 128 244

Legend Acoustics
Lake Macquarie NSW
Ph/text: 0407 600 009

Ph: (02) 4648 4448

ACTIVE SPEAKER DEALERS

Australia

DEQX
Brookvale NSW 2100
Ph/text: 0439 564 250
E: alangford@deqx.com

Active Hifi Systems
Emerald VIC 3782
Ph/text: 0427 053 770
E: mark@activehifisystems.com.au

Carlton Audio Visual
164 Lygon St
Carlton MELBOURNE VIC
Ph: (03) 9639 2737

Legend Acoustics
Lake Macquarie NSW
Ph/text: 0407 600 009
E: rod@legendspeakers.com.au


USA

Knowledge Resources Corporation
4621 Abiline Circle
AURORA CO 80015-3903 USA
P: 1 303-519-9076
E: LarryO@KRC-us.com

New Zealand

Feedback Audio
64 Budge Street
Blenheim 7001 NZ
P: 03 578 8303
E: ChrisHawkins0@xtra.co.nz

© Legend Loudspeakers. All rights reserved. Subject to our Terms & Conditions.  Website by Hobart Design.